Yanmar 6LY3 series - Page 39

PRODUCT OVERVIEW
6LY3 Operation Manual 31
Control Head Operation
Selecting Active Station:
Figure 13
(a) (Figure 13, (1)) shows a typical
inactive station.
(b) Press the SELECT button
(Figure 13, (2)). The button lights
(grayed in (Figure 13)) and the
station select light flashes (star
around light in (Figure 13, ).
(c) Move the handle(s) to forward or
reverse throttle to match the handle
location of the active station
(Figure 13, (3)). The corresponding
handle button lights glow steady
(grayed in (Figure 13, (3))) and the
station select light glows steady
(grayed in (Figure 13, (3))).
Engaging / Disengaging Shift Disconnect
Mode:
Figure 14
Engage:
(a) Return the handle(s) to neutral. The
neutral light(s) glow steady
(Figure 14, (1)).
(b) Press the NEUTRAL button(s)
(Figure 14, (2)). The neutral light(s)
flash (star around light(s) in
(Figure 14, (2))).
(c) Move the handle(s) to forward or
reverse throttle (Figure 14, (3))
resulting in engine rpm control
without engaging marine gear.
Disengage:
(a) Return the handle(s) to neutral
(Figure 14, (4)).
(b) Press the NEUTRAL button(s)
(Figure 14, (5)). The neutral light(s)
glow steady (Figure 14, (5)).
Engaging / Disengaging Split Range
Throttle (SRT)
Note: Split Range Throttle is not
available if the boat is equipped
with the Trolling option.
N
F
R
N
F
R
NN
SELECT
SYNC
N
F
R
N
F
R
NN
SELECT
SYNC
N
F
R
N
F
R
NN
SELECT
SYNC
0002030
1 32
Back