Yanmar Lx410 - Page 119

14. PERIODIC SERVICE
14-12
Lx410/450/490 Operator's Manual
(A) Parking brake lock lever
(B) Power Take Off (PTO) switch
(C) Range gear lever
2. Seat Switch
1. Sit on the operator seat.
2. Move counterclockwise the brake pedal
connector lock to lock together the left and right
brake pedals.
3. Engage the parking brake securely, for details,
see "6. Lock and Set the Parking Brake" on page
7-4.
4. Push down Power Take Off (PTO) switch to OFF
position.
5. Move the following levers to the N (neutral)
position:
• Primary gear lever
• Range gear lever
• Forward/N/reverse lever
6. Turn the starter key switch to START position.
7. Slightly rise up from the operator seat to remove
weight from the operator seat.
8. Make sure that the engine is shut down.
9. Turn the starter key switch to the OFF position.
(A) Parking brake lock lever
(B) Power Take Off (PTO) switch
(C) Range gear lever
(D) Operator seat
4 IMG_4473b
(A)
(B)
14-13_PTO_SW_3
1
3
4
N
N
2
(C)
IMG_4479 2
IMPORTANT
● Do not dismount from the tractor.
NOTE
● The engine must stop when the operator is not
sitting on the operator seat.
(B)
(C)
(D)
P5-3 top view_1
(A)