Yanmar Lx450 - Throttle Control Lever; Accelerator Pedal; 3-Point Hitch Control Lever

8-10
8. OPERATE THE TRACTOR
Lx410/450/490 Operator's Manual
7. Adjust the throttle control lever to
reach the target speed
■ Throttle Control Lever
Use the throttle control lever to increase, decrease or
maintain the current engine speed.
(A) Throttle control lever
(a) Increase engine speed
(b) Decrease engine speed
■ Accelerator Pedal
1. Use the accelerator pedal to increase or decrease
tractor speed.
2. The accelerator pedal is mainly used when
traveling on roads.
(A) Accelerator pedal
(a) Depress to increase engine speed
(b) Release to decrease engine speed
8. Raise the implement
■ 3-Point Hitch Control Lever
● Pull the 3-point hitch control lever backward.
● Move any attached implements to the raised
position.
(A) 3-point hitch control lever
(a) Lower
(b) Raise
5
1
1
0
0
5
5
2
2
15 IMG_4500
(A)
(a)
(b)
Accelerator_pedal
(A)
(a)
(b)
NOTE
● For the implement control valve equipped tractor:
• use the implement control lever to move any
attached implements to the raised position
㪈
㪉
㪊
㪋
㪌
㪍
㪈㪘㪏㪉㪌㪇㪄㪍㪌㪋㪎㪇
3P_hitch_lever_3
(A)
(b)
(a)