EasyManua.ls Logo

Yanmar Lx490 - Check the Wheel Bolt Tightening Torque

Yanmar Lx490
168 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14. PERIODIC SERVICE
14-10
Lx410/450/490 Operator's Manual
Use low pressure, compressed air or water.
During the preceding procedure, maintain
maximum distance to the engine.
7. Install the radiator cooling screen.
8. Lower the hood.
(A) Radiator cooling fins
(B) Radiator cooling screen
(A) Radiator cooling screen
Check the Wheel Bolt Tightening
Torque
Service Intervals
Regular intervals: Before daily operation.
After adjusting the tire tread width and after
replacing the tires:
after 1 hour of operation
every 4 hours after that until appropriate
tightening torque values are reached and
maintained
For more information on maintenance work on the
wheel bolt tightening torque, for details, see "Check
the Wheel Bolt Tightening Torque" on page 12-2.
(A) Front wheel bolts
(B) Rear wheel bolts
NOTE
The above illustration shows Lx410/450.
NOTE
The above illustration shows Lx490.
450140212
(A)
450140211
(B)
490 radiator_screen
(A)
450120201 F-wheel
(A)
(A)
450120202 R-wheel
(B)
(B)

Table of Contents

Related product manuals