Yanmar SA Series - Check the Engine Oil Level

14. PERIODIC SERVICE
14-4
SA221/324/424 Operation Manual
■ Check the Engine Oil Level
1. Park the tractor safely and securely.
• For details, see "7. Safe Practices for Parking the
Tractor" on page 1-7.
2. Shut off the engine.
3. Chock all the tires safely and securely.
4. Allow the engine to cool down for several
minutes.
5. Raise the hood.
6. Remove the dipstick.
7. Clean the dipstick with a clean rag.
8. Insert the dipstick completely.
9. Remove the dipstick again.
10.Read the engine oil level on the dipstick.
11.The engine oil level must be between the upper
and lower marks on the dipstick.
<SA221>
<SA324/424>
<SA221>
<SA324/424>
(A) Dipstick
(B) Engine oil filler cap
(a) Upper mark
(b) Lower mark
IMPORTANT
●Always check the engine oil level daily.
• insufficient or no engine oil can cause serious
engine problems
●Always check the engine oil level before
commencing operations.
●Always check the engine oil level only while the
engine is cold and not running.
●Always maintain the engine oil level between the
lower and the upper mark.
IMPORTANT
●Before adding the engine oil, always:
• shut off the engine
• allow the engine to cool down for several
minutes
NOTE
●Make sure that the engine is cold before checking
the engine oil level.
NOTE
●During the checking of the engine oil level:
• dirt and dust can enter the engine
●Clean the area around the dipstick before
removing the dipstick.
(B)
(A)
(B)
(A)
(A)
(a)
(b)
(A)
(a)
(b)
SA221_324_424_OperatorsManual.book 4 ページ ２０１８年６月４日 月曜日 午後５時１９分