115 support@yardistrystructures.com
Components
Sealant
Step 25: Apply Sealant
See page 6 for Warning and
First Aid Information.
Note: All surfaces to be clean, dry, dust
and grease free before application with
temperatures above 5
°
C (41
°
F), no warmer
than 35
°
C (95
°
F).
•
then put in caulking gun. See page 6.
• Apply sealant in small beads and smooth
as required.
• Clean excess with a cloth or paper towel
before it skins over.
• Always wear safety glasses and rubber
gloves when using product.
On the outside of the
assembly apply silicone
sealant on three sides of
each Window Panel.
Sealant should be applied
in small beads and
smoothed out.
NOTE: Sealant is not
required for Roof Panels.
F25.1
F25.2
Front and End Wall
Back Wall and End Wall with
Gable Vent
Sealant
To Next Page
