65 support@yardistrystructures.com
Hardware
Step 9: Roof Peak Assembly
14 x #10 x 1-1/4” Pan Screw (black)
S12
Components
2 x PC Ridge Cap
1 x Sealant
PC Ridge
Cap
S12
x 14
Tight
F9.1
F9.2
F9.4
See page 6 for Warning and
First Aid Information.
Note: All surfaces to be clean, dry, dust
and grease free before application with
temperatures above 5
°
C (41
°
F), no warmer
than 35
°
C (95
°
F).
•
then put in caulking gun. See page 6.
• Apply sealant in small beads and smooth
as required.
• Clean excess with a cloth or paper towel
before it skins over.
• Always wear safety glasses and rubber
gloves when using product.
Apply sealant where
PC Ridge Caps meet
and on each end
PC Ridge
Cap
To Next Page
