Yardline 4130 - SWING BEAM ASSEMBLY; Right Side Swing Beam

24
FORT
ROOF FRAME
Position upright centered
against horizontal frame.
Use a Clamp and Square to ensure squareness.
Drill through center of both bores.
x1
5/4 x 4 x 59-3/8”
2366-MS
SEE PAGE 7
RIGHT SIDE
SWING BEAM
Pre-drill two 1/4" pilot holes
at marked locations.
Re-drill all two holes from
opposite side using 1/2" bit.
FORT
TENT FRAME
Flat Washer
Lock Washer
1-3/4” Hex Bolt
T-Nut x2
x2
3” Screws
x2
2366-MS
2366-MS
5/4 x 4 x 59-3/8”
5/4 x 4 x 59-3/8”
You may need to add
washers to make hex
bolt  ush with T-nut.