53
SWINGS INSTALL
8" Minimum when occupied.
Adjust chains at Top.
x1
2180
Attach a Quick-Clip at the end of each swing chain.
Then, using the Quick-Clips, attach the swings to the Spring
Clips on the swing beam, as shown below.
Attach Playset Plaque
using One 1" Philips Head Screw
(provided) at each corner of Plaque.
Quick Clip x4
2097
SWING
2097
SWING
Tighten all Quick Clips using hand tools.
Always use Quick Clip between
chain and swing hanger for all
chain connections and adjustments.
All Quick Clips and Spring Clips must not be
removable unless using tools.
To Next Page
Loading...