OPERATION
- 10 -
3) If the choke lever has been moved to the “CLOSE” position to start the engine,
gradually move it to the“OPEN” position as the engine warms up.
starting the Engine, carefully note the following:
Due to engine work in low-temprature,engine can marm up more
than 30 s .If inconsistent engine speeds are experienced when
Choke Lever is rotated OPEN Position:
1) Move Choke Lever to Mid-Point Between OPEN and CLOSE Posintions and
allow Engine to develop additional operating heat.
2) After Engine has warmed up,move Choke Lever to OPEN Posintion
STOPPING THE ENGINE
To stop the engine in an emergency, simply turn the engine switch to the “OFF” position.
Under normal conditions, use the following procedure.
Pull out the engine switch.
To Next Page
Loading...
