Need help?Do you have a question about the Yardworks 60-2271-8 and is the answer not in the manual?
General| Power Source | Electric |
|---|---|
| Voltage | 20V |
| Cutting Width | 12 inches |
| Corded/Cordless | Cordless |
| Line Diameter | 0.065 inches |
Covers input voltage, current, feed type, speed, cutting path, line diameter, and weight.
Specifies the correct YARDWORKS 60-2269-6 replacement spool model.
Emphasizes understanding the manual, applications, limitations, and hazards.
Avoid wet areas, flammable liquids, and keep bystanders at a safe distance.
Wear eye protection and dress appropriately, avoid overreaching.
Avoid accidental starts, manage cords, and don't leave the tool unattended.
Keep tools clean, check parts for damage, and maintain handle cleanliness.
Reiterates wearing safety goggles to prevent eye damage from thrown objects.
Seek advice, ensure correct wiring, and use double insulated parts.
Avoid grasping cutting line, unintentional starts, forcing the trimmer, and proper storage.
Be aware of continuing rotation, use recommended accessories, and keep guards in place.
Clear vents and remove debris/objects before operation.
Use 120V, 15A circuit with a time-delayed fuse/breaker; replace damaged cords.
Explains the double insulation system for enhanced user safety.
Use identical parts for servicing and avoid wet conditions.
Importance of grounding via a polarized plug and matching extension cord.
Trimmer is for outdoor use only; grounding is essential for shock protection.
Table detailing correct AWG for cord length and ampere rating.
Use a separate circuit, proper wiring, and ensure voltage matches the motor nameplate.
Labels for key parts like power switch, auxiliary handle, telescoping boom, and guard.
Remove trimmer, guard, and spool; inspect for damage before use.
Visual guide to numbered components for assembly.
Do not use if any part is missing or damaged.
Step-by-step guide to attach the guard to the trimmer head.
Instructions for handling and replacing the sharp cutting blade.
How to lock the auxiliary handle for optimal control and balance.
Steps to extend or shorten the boom for user convenience.
How to pivot the trimmer head to one of three positions.
Steps to convert the trimmer for edging sidewalks and walkways.
Instructions for removing the old spool and installing a new one.
Guide on how to wind new monofilament line onto the spool.
Safe procedure for turning the trimmer on and off using the switch.
Allowing the trimmer to stop completely and disconnecting the power.
Explanation of the automatic line advancement feature and how to activate it.
Advice on efficient and safe trimming techniques and precautions.
Keeping the trimmer in good repair and cleaning it properly without water or solvents.
Procedures for replacing and winding the cutting line correctly onto the spool.
Details of the limited warranty, what is covered, and what is excluded.
Procedures for contacting service and obtaining repairs or replacements under warranty.
A visual breakdown of all trimmer components with numbered references.
A comprehensive list of all parts with item numbers, descriptions, and quantities.
To Next Page