EasyManua.ls Logo

YASEE GLM-77 - User Manual

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GLM-77 Blood Glucose Meter
User Manual
INTRODUCTION
Thank you for choosing the GLM-77 blood glucose meter. The meter associated with the
GLS-77 blood glucose test strip is designed to quantitatively measure the concentration of
glucose in capillary whole blood by persons with diabetes or by healthcare professionals for
monitoring glucose in the home or in healthcare facilities.
Please read this manual carefully before using your GLM-77 blood glucose meter. If you have
any questions or requirements, please contact us or your local distributor.
1

Questions and Answers

  • M
    Mark TurnerAug 9, 2025
    What to do if YASEE GLM-77 shows HI?
    • A
      Andrew SanchezAug 10, 2025
      If the blood glucose result on your YASEE Blood Glucose Meter is higher than 33.3 mmol/L or 600 mg/dL, but this is not confirmed by how you feel, first review the proper testing procedure and perform a quality check using a control solution. Then, repeat the blood test. If “HI” still appears, contact your doctor immediately.
  • M
    Michael UnderwoodAug 14, 2025
    What to do if YASEE Blood Glucose Meter shows LO?
    • E
      edwardslisaAug 14, 2025
      If your YASEE Blood Glucose Meter displays a blood glucose result lower than 1.1 mmol/L or 20 mg/dL, but this is not confirmed by how you feel, review the correct testing procedure and perform a quality check with a control solution. Repeat the blood test. If “LO” still appears, contact your doctor right away.
  • C
    Claire PetersAug 19, 2025
    Why YASEE GLM-77 Blood Glucose Meter not responding when strip is inserted?
    • T
      Tonya RamosAug 19, 2025
      If your YASEE Blood Glucose Meter isn't responding when you insert the test strip, the possible causes are: * The test strip is used. * The battery is dead. * The wrong strip is inserted. * The meter is defective. To resolve this: 1. Perform the test with a new test strip only. 2. Replace the battery. 3. Insert the correct test strip. 4. Contact support for help if the issue persists.
  • D
    Diana JamesAug 25, 2025
    What to do if YASEE GLM-77 not responding to blood sample?
    • B
      Brett PattersonAug 25, 2025
      If your YASEE Blood Glucose Meter isn't responding when you apply a blood sample to the strip, it might be due to: * Insufficient blood sample. * A defective meter. To address this: 1. Repeat the test with a sufficient sample. 2. Perform a Meter Quality Check by inserting a check strip.
  • C
    Charlene HillAug 30, 2025
    How to fix temperature error on YASEE GLM-77 Blood Glucose Meter?
    • J
      Jeffrey HollandAug 30, 2025
      If your YASEE Blood Glucose Meter indicates a temperature issue (above or below the operating range of the test strips), move to an area where the temperature is between 10ºC to 40ºC (50ºF - 104ºF). Avoid artificially heating or cooling the meter.
  • J
    Joseph MezaSep 3, 2025
    What to do if YASEE Blood Glucose Meter battery is dead?
    • T
      Tommy HurstSep 4, 2025
      If the battery of your YASEE Blood Glucose Meter is dead, replace the battery immediately. Also, if you suspect the test strip is damaged or the test was not performed correctly, perform the test with a new test strip and follow the test procedure correctly.

YASEE GLM-77 Specifications

General IconGeneral
BrandYASEE
ModelGLM-77
CategoryBlood Glucose Meter
LanguageEnglish