Yashica 8T2 - Unloading, or Reversing the Film

:l!Jnloading, or reversing the film .~. ~,.,
When. you have filmed 25 feet of movies, thus ~
exposing the first half-width of the fUm, pror:eed
as follows:
(1) The exposed film will be wound
on the take up spool.
(2) Remove the loaded spool from
the take-up spindle, taking care
not to let the film unwind,
Remove the
empty spool frolT
the upper spindleo
(3) Invert the loaded spool so tho:'
the "2" is visible, and then
insert it in the upper spindle.
(4) Repeat steps (5), (6), (7) and (8)
of the loading :nstructions.
(5) After you have filmed the
second
half-·wid1'f, ()f the 25 fooi'
film, remove the spool carefully,
keeping j'he film in place with
your finger. Replace it ii11me~
diately in the can in which il
was supplied.