Yashica 8T2 - Loading the Film

tOADING
THE FILM
Loading your Yashica Movie is easy if you follow these steps.
With some practice you will do it in seconds.
Important: Always load the camera in subdued light, or in
the shadow of your body if you are in
(1) Wind the camera motor. Then lift the film loading door
lock, turn it counter-clockwise, and open the film loading
door.
(2) Remove the empty spool.
(3) Remove tape around the film container.
(4) Place your finger on the film to keep it from loosening and
remove rubber band.