Flash Photography
When shooting indoors or at night, the use of an electronic flash unit
is recommended. For this purpose, the dedicated electronic flash "CS-
201 Auto" can be used with the FX-70 Quartz.
<Using the "CS-201 Auto"> When the FX-70 Quartz is used in
combination with the CS-201 Auto flash unit, automatic flash
photography can be performed with the shutter selector set to the "AUTO"
position. Set the flash unit's selector to "AUTO". When the unit is fully
charged, the camera will automatically switch to the flash synchro shutter
speed of 1/100 second, and the flash ready signal " ~ " inside the
viewfinder will light, showing that the camera and flash are ready to
photograph. When the shutter release button is pressed lightly, the LED
beside the "125" will flash.
Chart on viewfinder action when using a flash.
To Next Page
Loading...
