Camera Care
* Excessive heat may adversely affect the film, batteries or camera system and result in improper exposure.
Avoid leaving the camera in direct sunlight, glove or trunk compartment, rear-seat shelf of cars and other hot
areas. If the camera has been exposed to excessive heat, allow it to cool to normal temperature before use.
* Salt air, sand, dirt and other foreign matter will damage the camera's internal system if allowed to penetrate
inside. Take care to keep the camera clean when using it at the seashore or in sandy areas. Shocks from
dropping or bumping are another major cause of camera malfunction. Always handle your camera with great
care to ensure years of trouble-free operation.
* Avoid touching the lens, viewfinder eyepiece and other glass surfaces with your fingers. Blow dust and dirt
away from these surfaces with a blower/brush, or wipe gently with a soft cloth (after brushing) if necessary.
Clean smudges and smears on lens and mirror surfaces with high quality lens-cleaning solution and tissue.
Always take extra care in cleaning the lens and mirror surfaces to avoid scratching.
* Sudden and frequent changes in temperature could lead to corrosion of electrical contacts and cause other
malfunctions. When shooting in cold or hot areas, avoid extreme temperature changes as much as possible.
* Make it a point to always check the camera functions before taking pictures (travel, wedding, business photos,
etc.).
* It should be noted that when print films are processed, standard service-size prints will show an area slightly
less than that seen on the negative.
In order to get the best performance from this, camera, we recommend the use of Yashica and Contax brand
lenses and accessories. We take no responsibility for damage to the camera from the use of other brands of
products said to be for use on Yashica or Contax
To Previous Page
Loading...
