Yashica FX-DQUARTZ - Internal Assembly Disassembly; Mirror Box Assembly Removal; Shutter and ASA Base Plate Removal

Mirror Box Ass'y Removal:
The mirror box can be rnmoved together with the shu tle1 base platn ass'y, ASA base plate ass'y and
Amplifa~r ass'v.
1. Unsolder ten lead wires of flexible printed circuit.
At bottom of the body (six lead wires)
( 1) Green lead wire from the connector base.
(2) Violet and orange lead wires from the TF switch.
(3) Back and
pink lead wires from the relRase rnagnet.
(4)
Red lead wire from the batte1·y case.
On the pentaprism (four lead wires)
(1) Yellow, black and brown lead wires from the shutte1·.
(2) Green
lead wire from the release socket.
2. Shutter base plate ass'y removal:
( 1) Remove two shutter base plate ass'y setscrews (61912522) holding the shutter base plate ass'y
to the
body.
r.,.,,,2,
I
4--<l----Shutter dial
shaft
_,_ ___ Shutter base
plate ass'y
.
t<..:----- 61912522
Fig. 2
2