Yashica Lynx-14E - Exposure Adjustment with Filters; Filter Exposure Compensation

14
EXPOSURE ADJUSTMENT WHEN USING FILTERS
, ~:Jf\ ·'d
" When" a filter is - used compensation for exposure
" must be made according to the exposure factor
of the f ilter in use (2X in case of Y2 filter).
With the Lynx-14E, this exposure compensation
is accompl ished through adjustment of the aper-
ture setting.
If the correct exposure setting under the pr eva il-
ing light cond it i on is f/16 at 1/250 sec., exposure
compensation
when using a filter with a factor of
2X sho uld be mpde by " turning the apert\Jre ring
by one se tting to f/11. With a 4X filter, th e
aperture setting
must be adjusted by two stops to
f/8 .
Note: I n the above circumstance after adjustments have been made, di sregard the red "OVER"
indicator lamp which will turn on and press the shutter button. If lighting condition changes
just prior to making an exposure, make exposure adjustment all over again.