Yashica Lynx-14E - Special Shutter Modes; Using a Cable Release; Bulb Exposure

21
USE OF CABLE RELEASE· BULB EXPOSURE
USE OF CABLE RELEASE
To prevent erratic movement during exposure,
it - is advisable to mount the camera on a tripod
and to use a cable release when shooting at 1/30
sec. or slower shutter speeds. Mou nt the cable
release
in the threaded socket on the shutter
release button.
BULB EXPOSURE
When the shutter speed control ring is adjusted to B
(bulb) setting, the shutter will remain open over
the duration the shutter release button is depressed.
This B setting is used when long exposure of
more than one second is required, and is effective
in shooting
night scenes, fireworks, etc.