When loading a 120 film (12 exposures), hold the back
cover with both hands and slide the Film Pressure
Plate with your thumbs until it clicks into position and
the sign 12 EX. (in green) appears in the window in the
middle of the plate. When loading a 220 film (24
exposures) hold the back cover with both hands and
slide the Film Pressure Plate with your thumbs until it
clicks into position and the sign 24 EX. (in red) appears
in the window in the middle of the plate.
Cautions:
When sliding the Film Pressure Plate from 12 EX. to 24
EX., or vice versa, use both hands and then check if
the plate spring is working properly by depressing the
plate once or twice.
Uneven film feeding and poor focusing may result if the
Film Pressure Plate is not properly positioned.
FILM LOADING continued (page 29)
To Next Page
Loading...
