EasyManua.ls Logo

Yashica MAT EM - Advanced Features and Maintenance; Flash Synchronization; Self-Timer Operation; Unloading Film

Yashica MAT EM
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
One of the first accessories you will want will b? a flash unit.
Synchronization for flash is built-in. A standard PC connector plugs into the flash terminal.
The battery case is attached to the camera by an arm that screws into the tripod socket.
Selector Position M X X
Bulb used M type F type Electronic Flash
Shutter Speed Any Speed 1/60 or slower
Any Speed (When
using Self-Timer)
SELF-TIMER
For taking self-portraits or group pictures, you have about 8
seconds to get into the picture. Therefore your camera must
be mounted on a tripod or brace to pre. vent o blurred
picture.
Caution! Be sure to move the synchro selector to the X
position when using Self-timer.
UNLOADING FILM
After all 12 pictures have been taken, wind the Film
Transport Crank about 6 times to take up the remaining
film and open the camera and remove the film.

Related product manuals