YASKAWA DX100 - Page 128

3 Teaching
3.5 Modifying Jobs
3-45
155507-1CD
RE-CSO-A037
DX100
5. Select { ✻ ENABLE STEP NO}.
– Step numbers in the address area disappear.
– In the pull down menu, { ✻ ENABLE STEP NO} changes to
{ENABLE STEP NO}.
6. Select {ENABLE TOOL NO}.
– Tool numbers appear in the address area.
– In the pull down menu, {ENABLE TOOL NO} changes to
{ ✻ ENABLE TOOL NO}.
Tool numbers only appear in the line during the move instruction and
also appear under the teach mode.
TOOL NO.
128 of 554