YASKAWA DX100 - Page 129

3-46
155507-1CD
RE-CSO-A037
DX100
3 Teaching
3.5 Modifying Jobs
7. Select { ✻ ENABLE TOOL NO}.
– Step numbers in the address area disappear.
– In the pull down menu, { ✻ ENABLE TOOL NO} changes to 
{ENABLE TOOL NO}.
8. Select both {ENABLE STEP NO} and {ENABLE TOOL NO}.
– The both step numbers and tool numbers appear in the address
area.
– In the pull down menu, {ENABLE STEP NO} changes to 
{ ✻ ENABLE STEP NO}.
– In the pull down menu, {ENABLE TOOL NO} changes to 
{ ✻ ENABLE TOOL NO}.
Tool numbers only appear in the line during the move instruction and
also appear under the teach mode.
STEP NO.
TOOL NO.
129 of 554