3-54
155507-1CD
RE-CSO-A037
DX100
3 Teaching
3.6 Editing Instructions
3. Changing the data type
(1) To change the data type of an additional item, move the cursor to
of the item and press [SELECT]. The data type list appears.
Select the desired data type.
(2) After additional items have been added, modified or deleted as
required, press [ENTER]. The DETAIL EDIT window closes and
the JOB CONTENT window appears.
6. Press [INSERT] and [ENTER].
– The instruction displayed in the input buffer line is inserted.
To Next Page
Loading...
