YASKAWA DX100 - Selecting the Range

3-66
155507-1CD
RE-CSO-A037
DX100
3 Teaching
3.7 Editing Jobs
3.7.1 Selecting the Range
After setting the range, Copy and Delete can be performed.
1. Move the cursor to the instruction area in the JOB CONTENT window.
2. Move the cursor to the start line and press [SHIFT] + [SELECT].
– The range specification begins, and the address is displayed in
reverse.
3. Move the cursor to the end line.
– The range is varied by moving the cursor. Up to the line specified by
the cursor is the range.
Move the cursor to
instruction area.
Start line
End line
149 of 554