6 Convenient Functions
6.1 One-touch Operation “Direct Open”
6-2
155507-1CD
RE-CSO-A037
DX100
1. In the JOB CONTENT window, move the cursor to the job name or the
condition file for which the window is to be displayed.
2. Press the direct open key .
– This key lamp lights and the JOB CONTENT window or the
condition file window appears.
– When the direct open key is pressed once again, the key lamp
turns OFF, and the window returns to the former JOB CONTENT
window.
• The direct open function cannot be used again while a
directly opened window is shown.
• If another window is selected while the direct open
function is effective, the function is automatically cancelled
and the lamp on the direct open key goes out.
• Once another JOB CONTENT window is opened by the
direct open function, the former job cannot be
continuously operated. (Stopped until the opened JOB
CONTENT window is closed.)
To Next Page
Loading...
