YASKAWA DX100 - Page 262

6 Convenient Functions
6.3 Parallel Shift Function
6-22
155507-1CD
RE-CSO-A037
DX100
– To directly input the value using the Numeric keys, press [SELECT]
to display the input buffer line.
– After the number is input, press [ENTER] to modify the number
value in the input buffer line.
– Changing the coordinate system in which the shift is performed 
Move the cursor to the instruction in the input buffer line and press
[SELECT]. The DETAIL EDIT window appears.
– Line up the cursor with “BF” and press [SELECT]. The selection
dialog box appears. Line up the cursor with the coordinate system
to be changed, and press [SELECT].
– After the coordinate system modification is complete, press
[ENTER]. The DETAIL EDIT window closes and the JOB
CONTENT window appears.
6. Press [INSERT] and then [ENTER].
– The instruction displayed in the input buffer line is registered.
PX =
MSHIFT  0 BF PX001 PX002
MSHIFT PX000 BF PX001 PX002
0006 GETS PX000 $PX000
0007 MSHIFT PX000 RF PX001 PX002
0008 DOUT OT#(1) ON
Line where
MSHIFT is
registered.
262 of 554