YASKAWA DX100 - Page 313

6-73
155507-1CD
RE-CSO-A037
DX100
6 Convenient Functions
6.7 Multi Window Function
Switch the active window in the single window mode.
1. Set the mode of the general-purpose displaying area to single window
mode.
2. Press [MULT] key
– The following windows are displayed in the order mentioned in
section 6.7.2 “Setting the Dividing Pattern of the General-Purpose
Display Area” on page 6-63. (1
2341······)
NOTE
During the period before menu is selected when alarm
occurred, the active window cannot be switched if alarm
window is displayed, direct open is ON or a window is
displayed by key allocation operation.
313 of 554