YASKAWA DX100 - Page 352

6 Convenient Functions
6.10 Jog Key Allocation
6-112
155507-1CD
RE-CSO-A037
DX100
3. Move the cursor key to “GROUP” and press down [SELECT] key.
– The list of allocatable external axes appears.
4. Select an external axis to be allocated.
– The selected external axis is indicated in “GROUP” and “1” is
indicated in “AXIS NO”.
5. (In the cases where the external axis is composed of more than two
axes and the axis from the 2nd-axis are operated)
Move the cursor key to “AXIS NO”. and press down [SELECT] key.
– The list of selected external axes appears.
6. Select a desired axis number.
– The selected axis is indicated in “AXIS NO”.
352 of 554