6-137
155507-1CD
RE-CSO-A037
DX100
6 Convenient Functions
6.15 Analog Output Function Corresponding to Speed
5. Change any additional items and numerical values
– <Register without changes>
To register without changes, perform operation of step 6.
– <Register with addition or change of the additional items>
• To change the output port number
In case of using [SHIFT] and the cursor key, move the cursor to
the output port number, and then press [SHIFT] and the cursor
key simultaneously, to change the output port number.
In case of using the number keys, move the cursor to the output
port number, and press [SELECT] to display an input buffer line.
Enter the number, and then press [ENTER] to change the number
displayed.
• To change the basic voltage, the speed, and the offset voltage
Move the cursor to the instruction in the input buffer line, and then
press [SELECT]. The detail edit display is shown.
Move the cursor to “UNUSED” of the additional item to be
changed, and then press [SELECT]. The selection dialog is dis-
played.
Move the cursor to the additional item to be changed, and press
[SELECT].
When the additional item is changed, press [ENTER]. The detail
To Next Page
Loading...
