YASKAWA DX100 - Inserting a USB Memory Stick

7-5
155507-1CD
RE-CSO-A037
DX100
7 External Memory Devices
7.1 Memory Devices
7.1.2.3 Inserting a USB Memory Stick
When inserting a USB memory stick, take note of insertion direction.
With the USB memory stick face-up and the connector upwards, insert the
stick slowly into the slot of the programming pendant of which display
face-down.
Forcible insertion may result in damage to the USB memory stick or USB
connector.
After inserting the stick, be sure to close the cover of the connector before
starting operation.
Fig. 7-2: Using a USB Memory Stick
NOTE
When a USB memory stick is used, the waterproofing of
programming pendant cannot be maintained.
If the USB memory stick is always set in the programming
pendant, the stick may fall out of the pendant.
If it is impossible to maintain the waterproofing of
programming pendant or to prevent the USB memory stick
from falling out of the programming pendant, use a
Compact Flash card instead.
USB Connector
Insertion position
Top surface
USB memory stick
391 of 554