YASKAWA DX100 - Operation Flow

7-11
155507-1CD
RE-CSO-A037
DX100
7 External Memory Devices
7.3 Operation Flow
7.3 Operation Flow
The following description is the operation flow for external memory
devices.
• SELECT DEVICE 
Select {FD/PC CARD} --> {DEVICE}, and the destination device for
saving. 
The device selected is valid after turning the power supply ON again. 
*1: Sub menu {FORMAT} appears when selecting FC1 or FC2.
• SELECT FOLDER 
Select {FD/PC CARD} --> {DEVICE}, and the destination folder for
saving. 
The folder selected is invalid after turning the power supply ON
again. 
*2: {FOLDER} appears when using the Compact Flash as a device. 
*3 The settings of {CREATE NEW FOLDER}, {DELETE FOLDER},
and {ROOT FOLDER} can be set.
• SELECT SUB MENU 
Select an operation to be performed from {LOAD}, {SAVE},
{VERIFY}, and {DELETE}.
• SELECT DATA CATEGORY 
Select the target data category.
• SELECT DATA 
Select the target data. 
“3. BATCH USER MEMORY”, “7. BATCH CMOS”, and “8. ALL
CMOS AREA” do not require this operation. 
*4 Individual selection, batch selection, marker (*) selection, and
canceling selection can be performed.
• EXECUTE 
Select [ENTER] or {EXECUTE}.
Main Menu
{FD/PC CARD}
Sub Menu
{LOAD} {SAVE} {VERIFY} {DELETE} {FORMAT} {DEVICE} {FOLDER}
Select Data Category
Select Data
Select [ENTER] or {EXECUTE}
Select Floppy Type
Select Size
Select
Device
Operate Folder
{EXECUTE} Select Folder
*1 *2
*3
*4
397 of 554