YASKAWA DX100 - S2 C410: Word Registration Function; Word Editing Function Specification

8 Parameter
8.3 Mode Operation Setting Parameters
8-25
155507-1CD
RE-CSO-A037
DX100
8.3.0.39 S2C410: WORD REGISTRATION FUNCTION / WORD EDITING
FUNCTION SPECIFICATION
Specifies the valid or invalid to edit the words while inputting the
characters.
*It is able to edit the words when the security mode is the edit mode or the
management mode.
8.3.0.40 S2C413: JOB UNDELETE FUNCTION
This function doesn’t completely delete a job from its memory when
deleting the job, but saves the data so that the job can be restored as
needed.
This parameter can be set on {TEACHING CONDITION} window.
If a job is deleted while this function is valid, the job disappears from the
JOB LIST window. In this case, {TRASH JOB LIST} is newly displayed to
{JOB} on the main menu and the deleted job is listed on it.
0 : Invalid
1:Vaild
NOTE
The job will not be listed on the trash job list and will not be
restored if it is deleted when this function is invalid.
456 of 554