YASKAWA DX100 - S2 C789 to S2 C792: COOLING FAN ALARM 1 OPERATION; S2 C793 to S2 C796: COOLING FAN ALARM 2 OPERATION; S2 C797 to S2 C800: COOLING FAN ALARM 3 OPERATION; S2 C801 to S2 C804: FAN ALARM 1 POWER SOURCE STATUS

8 Parameter
8.8 Hardware Control Parameters
8-53
155507-1CD
RE-CSO-A037
DX100
8.8.0.5 S2C789 to S2C792: COOLING FAN ALARM 1 OPERATION
8.8.0.6 S2C793 to S2C796: COOLING FAN ALARM 2 OPERATION
8.8.0.7 S2C797 to S2C800: COOLING FAN ALARM 3 OPERATION
These parameters specify the operation of cooling fan 1 to 3 with alarm
sensor, connected to power ON unit.
Each bit specifies the power ON unit to which the detecting sensor is
connected.
8.8.0.8 S2C801 to S2C804: FAN ALARM 1 POWER SOURCE STATUS
8.8.0.9 S2C805 to S2C808: FAN ALARM 2 POWER SOURCE STATUS
d7 d0
S2C789,S2C793,S2C797
d7 d0
S2C790,S2C794,S2C798
SERVOPACK#1
SERVOPACK#2
SERVOPACK#4
SERVOPACK#3
d7 d0
S2C791,S2C795,S2C799
SERVOPACK#6
SERVOPACK#5
d7 d0
S2C792,S2C796,S2C800
SERVOPACK#8
SERVOPACK#7
484 of 554