YASKAWA DX100 - Method to Prohibit Weaving During a TEST RUN or FWD Operation; Prohibiting Weaving by Means of a System Input Signal

9-36
155507-1CD
RE-CSO-A037
DX100
9 General Purpose Application
9.3 Using Files
9.3.3.6 Method to Prohibit Weaving During a “TEST RUN” or FWD Operation
1. Press [AREA].
2. Select {UTILITY}.
3. Select {SPECIAL TEACH}.
4. Select prohibit weaving during the FWD/TEST RUN operation.
– The SPECIAL TEACH window appears.
9.3.3.7 Prohibiting Weaving By Means of a System Input Signal
The system input signal #40047 is used.
The system input signal can prohibit weaving at any time during a play
operation, regardless of whether or not it is in a check mode.
525 of 554