YASKAWA DX100 - Setting Operation

8 System Setup
DX100 8.6 Interference Area
8-65
8.6.3.2 Setting Operation
1. Select {ROBOT} under the main menu.
2. Select {INTERFERENCE}.
– The INTERFERENCE AREA window appears.
3. Select the desired interference signal number.
– Select the desired interference signal number using the page
key or by number input.
– When selecting the desired interference signal number by number
input, select {PAGE} to input the desired signal number.
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167