8 System Setup
DX100 8.8 User Coordinate Setting
8-83
8.8 User Coordinate Setting
8.8.1 User Coordinates
Definition of the User Coordinates
User coordinates are defined by three points that have been taught to the
manipulator through axis operations. These three defining points are
ORG, XX, and XY, as shown in the diagram below. These three points of
positional data are registered in a user coordinate file.
ORG is the home position, and XX is a point on the X-axis. XY is a point
on the Y-axis side of the user coordinates that has been taught, and the
directions of Y- and Z-axes are determined by point XY.
User Coordinate Files
Up to 63 kinds of user coordinates can be registered. Each coordinate has
a user coordinate No. and is called a user coordinate file.
NOTE
It is important that the two points ORG and XX be taught
accurately.
User coordinate definition point
ORG: Home position
XX: Point on the X-axis
XY: Point on the Y-axis
ORG
X-axis
XY
XX
Z-axis
Y-axis
User coordinate file 63
User coordinate file 4
User coordinate file 3
User coordinate file 2
User coordinate file 1
To Next Page
Loading...
