YASKAWA DX100 - Numeric Key Customize Function; Allocatable Functions; Key Allocation (EACH); What Is the Numeric Key Customize Function

8 System Setup
DX100 8.15 Numeric Key Customize Function
8-100
8.15 Numeric Key Customize Function
8.15.1 What is the Numeric Key Customize Function?
With this function, the user can set the function of an application that has
been allocated to the numeric keys of the programming pendant to the
other function.
Since any frequently used operation can be allocated to the numeric keys
on the programming pendant, decreased key operations reduce the
teaching time.
8.15.2 Allocatable Functions
There are two allocation methods as follows:
• Key Allocation (EACH)
• Key Allocation (SIM)
8.15.2.1 Key Allocation (EACH)
With key allocation (EACH), the manipulator operates according to the
allocated function when the numeric key is pressed. The allocatable
functions are listed below.
NOTE
The Numeric Key Customize Function is allowed to set only
when the security mode is in the management mode.
Function Description
Manufacturer
allocation
Allocated by Yaskawa. Allocating another function
invalidates the function allocated by the manufacturer.
Instruction
allocation
Allocates any instructions assigned by the user.
Job call allocation Allocates job call instructions (CALL instructions). The
jobs to be called are only those registered in the reserved
job names. (Specified by the registration No.)
Display allocation Allocates any displays assigned by the user.
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167