YASKAWA DX100 - Momentary Output Allocation; Pulse Output Allocation

8 System Setup
DX100 8.15 Numeric Key Customize Function
8-108
8.15.3.6 Momentary Output Allocation
Set this function in the KEY ALLOCATION (SIM) window.
1. Move the cursor to the “FUNCTION” of the key to be allocated and
press [SELECT].
– A selection list appears.
2. Select “MOMENTARY OUTPUT”.
– The output No. is displayed in the “ALLOCATION CONTENT”.
(1) To change the output No., move the cursor to the No. and press
[SELECT]. Then numeric value can be entered.
(2) Input the number to be changed, and press [ENTER].
8.15.3.7 Pulse Output Allocation
Set this function in the KEY ALLOCATION (SIM) window.
1. Move the cursor to the “FUNCTION” of the key to be allocated and
press [SELECT].
– A selection list appears.
2. Select “PULSE OUTPUT”.
– The output No. and output time are displayed in the “ALLOCATION
CONTENT”.
(1) To change the output No. or output time, move the cursor to the
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167