YASKAWA DX100 - Initializing Data File

8 System Setup
DX100 8.18 File Initialization
8-120
8.18.2 Initializing Data File
1. Turn ON the power supply again while pressing [MAIN MENU]
simultaneously.
2. Change the security mode to the management mode.
3. Select {FILE} under the main menu.
4. Select {INITIALIZE}.
5. Select {FILE/GENERAL DATA}.
– The INITIALIZE window appears.
6. Select the data file to be initialized.
– The selected data file/general data are marked with ““.
– The parameters marked with "
" cannot be selected.
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167