YASKAWA DX100 - Initializing Parameter File

8 System Setup
DX100 8.18 File Initialization
8-121
7. Press [ENTER].
– A confirmation dialog box appears.
8. Select {YES}.
– The selected data file/general data are initialized.
8.18.3 Initializing Parameter File
1. Turn ON the power supply again while pressing [MAIN MENU]
simultaneously.
2. Change the security mode to the management mode.
3. Select {FILE} under the main menu.
4. Select {INITIALIZE}.
5. Select {PARAMETER}.
– The parameter selection window appears.
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167