YASKAWA DX100 - CMOS.BIN Load

9 System Backup
DX100 9.2 Backup by CMOS.BIN
9-5
7. Select {YES}.
– The CMOS.BIN file is overwritten in the CompactFlash.
9.2.2 CMOS.BIN Load
Follow the procedures below to load CMOS.BIN.
1. Turn ON the DX100 power supply while pressing [MAIN MENU].
2. Change the security mode to the maintenance mode, or Yaskawa
mode.
3. Insert a CompactFlash into the CompactFlash on the programming
pendant.
– When USB memory is used instead of CompactFlash, mount USB
memory and select {DEVICE} → “USB: PENDANT”.
4. Select {FD/PC CARD} under the main menu.
– The sub menu appears.
5. Select {LOAD}.
The load display appears.
– The items marked with "
" cannot be selected.
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167