9 System Backup
DX100 9.3 Automatic Backup Function
9-12
E. MODE CHANGE BACKUP
Set the automatic backup function to be valid or invalid when the mode
is switched from teach mode to play mode.
Each time [SELECT] is pressed, "INVALID" and "VALID" are displayed
alternately.
F. STARTUP AUTO BACKUP
Set the backup function to be valid or invalid when the power of the DX
100 is turned ON.
Each time [SELECT] is pressed, "INVALID" and "VALID" are displayed
alternately.
G. SPECIFIC INPUT BACKUP
Set the backup function to be valid or invalid when specific input signal
(
# 40560) is input (rising edge from 0 to 1).
Each time [SELECT] is pressed, "INVALID" and "VALID" are displayed
alternately.
H. UNIV.OUT NO. ON ERROR
Set "1" to the specified user output signal which was specified in this
chapter when the automatic backup error occurs.
The term "automatic backup error" here means that the backup is not
performed successfully before the next backup (including retry opera-
tion) starts.
I. DISPLAY AT EMERGENCY
Set the method of notification of the automatic backup error to
"ERROR" or "MESSAGE."
Each time [SELECT] is pressed, "ERROR" and "MESSAGE" are dis-
played alternately.
J. DURING ALARM OCCURENCE
Set the backup function to be valid or invalid when an alarm is
occurred.
Each time [SELECT] is pressed, "INVALID" and "VALID" are displayed
alternately.
K. STORED FILE SETTING
Set the number of files to be stored by the automatic backup function.
The number mentioned on the right side of this item with "(Max)" indica-
tion is the maximum number of files that can be stored in the Compact-
Flash inserted when this window is displayed.
The settings range from 1 to (Max). When this setting value is changed,
the backup file arrangement starts.
L. BACKUP FILES
Indicates the existence of the files or the number of backup files stored
in the CompactFlash inserted when this window is displayed.
M. LATEST BACKUP FILE
Indicates the date of the latest file in the CompactFlash inserted when
this window is displayed.
N. ARRANGE
When the setting of maximum number of stored files is changed, the file
arrangement of the backup files in the CompactFlash is executed.
With this operation, the file arrangement can be performed without
changing the maximum number of stored files.
To Next Page
Loading...
