10 Upgrade Function
DX100 10.2 Upgrade Procedure
10-2
2. Initial window appears approx. 40 seconds later.
10.2.2 Automatic Upgrade of YPP01
In case that the pendant application version of YPP01 is older than the
one of YCP01 or the pendant appplication version of YPP01 is not
compatible to the one of YCP01, the YPP01 is automatically upgraded.
Not only the application software but the OS of the Programming Pendant
is also upgraded automatically.
(OS: Operating System)
1. Automatic upgrade process comletes and the communication process
between YCP01 and YPP01is restarted.
– Some upgraded softwares require restart.
In this case restart is done automatically and the communication
process between YPP01 and YCP01 starts again.
2. Initial window appears approx. 40 seconds later.
NOTE
Every time the OS is upgraded automatically, restart is
done. There is no need of calibrating, for the calibration
data is taken over.
To Next Page
Loading...
