10 Upgrade Function
DX100 10.3 Error Message
10-4
10.3 Error Message
If Error occurs while automatic upgrading, exercise the following
procedure.
• Turn on the main power supply of DX100.
– Automatic upgrade might be exercised again.
• In case error occurs during automatic upgrade process.
(1) Prepare CF for upgrading or USB memory.
(2) Press [2], [8] and [HIGH SPEED] at the same time.
-Upgrade of the OS of Programming Pendant
(3) Press [INTERLOCK], [8] and [SELECT] at the same time.
(4) Exercise manual upgrading.
-Refer to “DX100 Upgrade Procedure” (HW0485193) for detail.
To Next Page
Loading...
