YASKAWA DX100 - 11 Modification of System Configuration; Addition of I;O Modules

11 Modification of System Configuration
DX100 11.1 Addition of I/O Modules
11-1
11 Modification of System Configuration
11.1 Addition of I/O Modules
To add I/O modules, turn OFF the power supply.
1. Turn ON the power supply again while pressing [MAIN MENU]
simultaneously.
2. Change the "SECURITY MODE" to the "MANAGEMENT MODE".
3. Select {SYSTEM} under the main menu.
– The system window appears.
4. Select {SETUP}.
– The SETUP window appears.
– The items marked with "
" cannot be selected.
SUPPLE
-MENT
Addition operation must be performed in the management
mode.
In the operation mode or editing mode, only reference of
status setting is possible.
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167