YASKAWA DX100 - Page 239

11 Modification of System Configuration
DX100 11.2 Addition of Base and Station Axes
11-14
2. Select the type of control group to be modified.
– The MACHINE LIST window appears.
3. Select desired type in the type list.
– After the type selection, the window returns to CONTROL GROUP
window.
– Select "UNIV" (universal) when using a mechanism other than the
registered type (such as a servo track) as a station axis. When
“UNIV” is selected, interpolation motion (linear, circular, etc.) is not
supported.
TURN-1: TURN 1 AXIS STATION
TURN-2: TURN 2 AXIS STATION
UNIV-1: UNIVERSAL 1 AXIS STATI
O
UNIV-2: UNIVERSAL 2 AXIS STATI
O
...
STATION 1ST AXIS
TURN-1
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167