13 Description of Units and Circuit Boards
DX100 13.11 SERVOPACK
13-35
13.11 SERVOPACK
A SERVOPACK consists of a converter and a PWM amplifier of which
there are two types. One type is the SERVOPACK with a combined
converter and a PWM amplifier and the other type is one where both units
are separate. (Refer to attached table “SERVOPACK Configuration”).
13.11.1 Description of Each Unit
13.11.1.1 Converter
This exchanges the power supply (3-phase : AC200/220V) supplied by
the contactor unit for DC power supply and supplies the power to PWM
amplifiers for each axis.
13.11.1.2 PWM Amplifier
This exchanges the DC power supply supplied by a converter for a
3-phase motor power source and outputs to each servo motor.
13.11.2 SERVOPACK Configuration
Table 13-2:
Configuration Device MH5/MH5L MH6 MA1400 VA1400
Model Model Model Model
SERVOPACK JZRCR-YSV01-11 JZRCR-YSV02-11 JZRCR-YSV02-11 JZRCR-YSV02-31
Converter SRDA-
COA12A01A-E
SRDA-
COA12A01A-E
SRDA-
COA12A01A-E
SRDA-
COA12A01A-E
PWM
Amplifier
S SRDA-
SDA14A01A-E
SRDA-
SDA14A01A-E
SRDA-
SDA14A01A-E
SRDA-
SDA14A01A-E
L SRDA-
SDA14A01A-E
SRDA-
SDA14A01A-E
SRDA-
SDA14A01A-E
SRDA-
SDA14A01A-E
U SRDA-
SDA06A01A-E
SRDA-
SDA14A01A-E
SRDA-
SDA14A01A-E
SRDA-
SDA14A01A-E
R SRDA-
SDA03A01A-E
SRDA-
SDA06A01A-E
SRDA-
SDA06A01A-E
SRDA-
SDA06A01A-E
B SRDA-
SDA03A01A-E
SRDA-
SDA06A01A-E
SRDA-
SDA06A01A-E
SRDA-
SDA06A01A-E
T SRDA-
SDA03A01A-E
SRDA-
SDA06A01A-E
SRDA-
SDA06A01A-E
SRDA-
SDA06A01A-E
E SRDA-
SDA14A01A-E