3 Installation
DX100 3.1 Handling Procedure
3-1
3 Installation
3.1 Handling Procedure
3.1.1 Using a Crane to Move the Controller
Check the following before handling the DX100:
• Confirm the weight of the controller before handling, and use a wire
rope with a rating that is greater than the weight of the controller.
• Install eyebolts for handling and confirm they are securely fastened
before hoisting.
CAUTION
• Crane, sling, and forklift operations must be performed only by
authorized personnel.
Failure to observe this caution may result in injury or damage.
• Avoid jarring, dropping, or hitting the controller during handling.
Excessive vibration or impacting the DX100 may adversely affect the
performance of the DX100.
Table 3-1: Approx. Weight of DX100
Models Available for
DX100
Approx. Weight
(kg)
small capacity:
MA1400, MA1900,
VA1400, MH5, MH5L,
MH6, HP20D, HP20D-6
A-Type
(standard)
100
middle, large capacity:
MH50, MS80, ES165D,
ES200D, VS50, SIA50D
A-Type
(standard)
100
Wire Rope
M16 Eye Bolt
To Next Page
Loading...
