3 Installation
DX100 3.2 Place of Installation
3-3
3.2 Place of Installation
The conditions listed below must be met before installing the DX100:
• Ambient temperature must be 0 to 45° C (32 to 113°F) during opera-
tion and -10 to 60°C (14 to 140°F) during transportation and mainte-
nance.
• Humidity must be low with no condensation (10~90%RH).
• It must be a place with little dirt, dust, or water.
• No flammable or corrosive liquids or gases, etc. in the area.
• Little jarring or potential for striking of the DX100 (under 0.5 oscilla-
tion).
• No large electric noise source (such as a TIG welding device, etc.)
nearby.
• No potential for collision with moving equipment such as forklifts.
To Next Page
Loading...
